not for new design (a) series name FTR-P1: FTR-P1 relay (b) contact arrangement c : 1 form c (spdt) (c) contact gap n : 0.3 mm gap p : 0.6 mm gap (d) nominal voltage 009 : 9 vdc 010 : 10 vdc 012 : 12 vdc (e) contact material w1 : silver-tin oxide-indium (f) custom designation to be assigned for custom specification note: part no. is printed on the top of relay as follows. (example) designation ordered: FTR-P1cn012w1 stamp: p1cn012w1 n features l original construction, where reduction of operational noise is considered when mounted on pcb, made it possible to design this quiet relay. (average acoustic noise level: 53 db, distance 10 cm) l new types of materials are used for the conductive parts, allowing this compact relay to carry 20 amp. l two types of contact material are available for various con- tact loads. l wider contact gap (0.6 mm) version is also available for enhanced cut-off ability to overload condition. n ordering information FTR-P1 series quiet power relay 1 pole20 a (for automotive applications) FTR-P1 c n 012 w1 - ** [example] (a) (b) (c) (d) (e) (f ) 1
2 FTR-P1 series (quiet type) not for new design item specifications contact arrangement 1 form c (spdt) material silver-tin oxide-indium (w1 type) voltage drop (resistance) maximum 100 mv (at 2 a 12 vdc) ratings 14 vdc/20 a (locked motor load) 14 vdc/inrush 20 a, break 4 a (motor free load) maximum carrying current 20 a/ 1 hour (25 c, 100% rated coil voltage) maximum inrush current w1 type: 60 a (reference) max. switching current (reference) 30 a at 16 vdc min . switching load* 1 (reference) 6 vdc 1 a coil operating temperature range C40 c to +85 c (no frost) (reter to the characteristic data) storage temperature range C40 c to +100 c (no frost) time value operate (at nominal voltage) maximum 10 ms release (at nominal voltage) maximum 5 ms life mechanical 1 10 7 operations minimum electrical 2 10 5 operations minimum (locked motor load) 4 10 5 operations minimum (motor free load) other vibration resistance 10 to 55 hz (double amplitude of 1.5 mm) shock misoperation 100 m/s 2 resistance endurance 1,000 m/s 2 weight approximately 10.0 g * 1 values when switching a resistive load at normal room temperature and humidity, and in a clean environment. the minimum applicable load varies with the switching frequency and operating environment. n specifications n coil data chart model nominal coil must operate must thermal voltage resistance voltage release resistance w1 type ( 10%) voltage FTR-P1cn009w1 9 vdc 135 w 5.4 v (at 20 c) 0.7 v 6.8 v (at 85 c) FTR-P1cn010w1 10 vdc 180 w 6.3 v (at 20 c) 0.8 v 73 c/w 7.9 v (at 85 c) FTR-P1cn012w1 12 vdc 240 w 7.3 v (at 20 c) 0.9 v 9.2 v (at 85 c) l 0.3 mm contact gap type
3 FTR-P1 series (quiet type) not for new design model nominal coil must operate must thermal voltage resistance voltage release resistance w1 type ( 10%) voltage FTR-P1cp009w1 9 vdc 100 w 5.4 v (at 20 c) 0.7 v 6.8 v (at 85 c) FTR-P1cp010w1 10 vdc 135 w 6.3 v (at 20 c) 0.8 v 65 c/w 7.9 v (at 85 c) FTR-P1cp012w1 12 vdc 180 w 7.3 v (at 20 c) 0.9 v 9.2 v (at 85 c) note: values in the table of coil resistance and must release voltage are measured at 20 c. l 0.6 mm contact gap type n suitable application contact material suitable load w1: silver-tin oxide-indium door lock power window solenoids, etc. (locked rotor) n characteristic data 1. maximum break capacity 2. life voltage between contacts (v) 10 10 15 12 20 25 30 35 40 50 contact switching current (a) 20 15 25 35 30 40 50 0.3 mm gap 0.3 mm gap 0.6 mm gap 0.6 mm gap locked motor load resistive load locked motor current (a) 14 vdc motor locked load 10 5 10 20 30 number of operations (x10 4 ) 20 15 25 35 45 30 40 50
4 FTR-P1 series (quiet type) not for new design 3. life test (example) ? test item 14 v dc-20 a motor lock 200,000 operations minimum ? test circuit ? current wave form ? shift of pick-up drop-out voltage ? shift of contact resistance ? test item 14 v dc-20 a motor free 400,000 operations minimum ? test circuit ? current wave form ? shift of pick-up drop-out voltage ? shift of contact resistance 0 100 10 1 20 40 60 80 100 (rl-1) 20 sec 20 a 0 a 20 a 0 a (rl-2) 0.3 sec 10 sec 0.3 sec 100 10 1 1000 100 10 (measured at 6 v-1 a) 0 100 10 1 20 40 60 80 100 100 10 1 1000 100 10 (measured at 6 v-1 a) m n.o. n.c. 0 a 4 a 20 a 16 a m rl-1 rl-2 n.o. n.c. n.o. n.c. pick-up initial percent of rated coil voltage (%) number of operations (x10 4 ) break make contact resistance (m w ) initial initial percent of rated coil voltage (%) number of operations (x10 4 ) break make contact resistance (m w ) initial pick-up drop-out drop-out
5 FTR-P1 series (quiet type) not for new design 4. coil temperature rise 5. operating coil voltage range (example) 6. vibration resistance characteristics 7. shock resistance characteristics coil temperature rise ( c) applied time (minutes) 0 0 10 20 30 20 40 60 80 100 120 0.8 w at 20?c 0.6 w (2) carrying current : applied coil power 10 a 0.8 w 0.6 w (1) carrying current : applied coil power 0 a ?0 0 50 100 5 10 15 applied voltage to the coil operating temperature (?c) (v) continuously applicable coil voltage range FTR-P1 y z x frequency : 10~2000 hz acceleration : 100 m/s 2 maximum vibration direction : see diagram detection level : chatter of 100 s minimum acceleration (m/s 2 ) 10 50 100 10 50 100 500 1000 2000 5 1 0.5 0.1 0.01 dual amplitude (mm) frequency (hz) automotive electronic standard 44 m/s 2 range where chattering occurs n.o. contact coil not energized on z-direction 0 200 400 600 800 1,000 x1 x2 y1 y2 z1 z2 shock level (m/s 2 ) shock direction : n.c. contact (coil de-energized) shock application time : 11 ms, half-sine wave test material : coil, energized and de-energized shock direction: see diagram detection level : chatter of 100 s minimum FTR-P1 z2 z1 y1 y2 x2 x1 : n.c. contact (coil energized)
6 FTR-P1 series (quiet type) not for new design n dimensions n reference data l dimensions p1cp012w1 f&t 9616 l schematic (bottom view) l mounting hole layout (bottom view) unit : mm 21.8 +0.2 16.9 +0.6 (2.3) (2.45) 12.0 3.5 16.3 +0.2 12.0 12.2 2.1 5-? 1.2 4 3 5 2 1 tolerance 0.1 n.c. n.o. com FTR-P1 n = 100 operate release distribution of operate and release voltage nominal voltage multiplying factor (%) 80 60 40 20 0 10 20 30 40 50 60 70 80 0 distribution (%) FTR-P1 n = 100 operate release distribution of operate and release time time (ms) 100 80 60 20 40 012345678 0 distribution (%) contact resistance (m ) distribution of contact resistance FTR-P1 n = 100 100 80 60 20 40 0 1020304050607080 0 distribution (%)
7 FTR-P1 series (quiet type) not for new design ? 2005 fujitsu components america, inc. all company and product names are trademarks or registered trademarks of their respective owners. rev.06/07/2005 japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: marcom@fcai.fujitsu.com web: www.fcai.fujitsu.com europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: www.fceu.fujitsu.com asia pacific fujitsu components asia ltd. 102e pasir panjang road #04-01 citilink warehouse complex singapore 118529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com fujitsu components international headquarter offices
|
